COMPANY HEADER
Print Back
  • Ferrite shielded radial power inductor
  • Ideal for power line filtering in switching power supply and other low to medium current applications
  • Inductance tolerance: M = ±20%
P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductors
Dimensional Drawing for P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductors
Unit of Measure
Items P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductors
P11RS2875-100M
3.60 Ampere (A) Rated Current (Idc) P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductor 		P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductors
P11RS2875-120M
3.20 Ampere (A) Rated Current (Idc) P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductor 		P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductors
P11RS2875-150M
2.96 Ampere (A) Rated Current (Idc) P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductor 		P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductors
P11RS2875-180M
2.72 Ampere (A) Rated Current (Idc) P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductor 		P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductors
P11RS2875-220M
2.48 Ampere (A) Rated Current (Idc) P11RS2875 Series Ferrite Shielded Radial Power Fixed Inductor
Inductance (±20%) N/A 10 µH N/A 12 µH N/A 15 µH N/A 18 µH N/A 22 µH
Maximum Direct Current Resistance (DCR) N/A 0.047 Ohm N/A 0.055 Ohm N/A 0.068 Ohm N/A 0.083 Ohm N/A 0.097 Ohm
Rated Current (Idc) N/A 3.60 A N/A 3.20 A N/A 2.96 A N/A 2.72 A N/A 2.48 A
Rated Current (Irms) N/A 2.95 A N/A 2.70 A N/A 2.25 A N/A 2.10 A N/A 2.00 A
Industry Standards / Certifications N/A RoHS Compliant
Compact Diameter N/A 8.3 mm
Compact Height N/A 7.5 mm
Standard Operating Temperature Range N/A -40 to +85 ºC
Note N/A
  1. Inductance measured: 1 kHz, 1.0 Vrms
  2. Idc: 10% inductance drop typical from initial value
  3. Irms: ΔT ≤ 40ºC Temp Rise at rated current.
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.010 .XXX : ±0.003
mm: X.X : ±0.254 X.XX : ±0.076