COMPANY HEADER
Print Back
  • Designed for use with the Maxim™ MAX253 and MAX845 monolithic oscillator/power driver 3.3 V / 5.0 V source
  • Construction complies with IEC 60950 Basic, Supplementary, and Reinforced isolation requirements
  • UL60601 and VDE compliant designs available upon request
M6210 Series RS-485/RS-422 Interface Push-Pull Transformers
Unit of Measure
Items M6210 Series RS-485/RS-422 Interface Push-Pull Transformers
M6210-21
1.50 Microhenry (µH) Maximum Inductance LL(1-4) M6210 Series RS-485/RS-422 Interface Push-Pull Transformer 		M6210 Series RS-485/RS-422 Interface Push-Pull Transformers
M6210-83
2.00 Microhenry (µH) Maximum Inductance LL(1-4) M6210 Series RS-485/RS-422 Interface Push-Pull Transformer 		M6210 Series RS-485/RS-422 Interface Push-Pull Transformers
M6210-43
1.20 Microhenry (µH) Maximum Inductance LL(1-4) M6210 Series RS-485/RS-422 Interface Push-Pull Transformer 		M6210 Series RS-485/RS-422 Interface Push-Pull Transformers
M6210-34
1.20 Microhenry (µH) Maximum Inductance LL(1-4) M6210 Series RS-485/RS-422 Interface Push-Pull Transformer 		M6210 Series RS-485/RS-422 Interface Push-Pull Transformers
M6210-11
1.00 Microhenry (µH) Maximum Inductance LL(1-4) M6210 Series RS-485/RS-422 Interface Push-Pull Transformer
Minimum Inductance (1-4) N/A 500 µH
Turns Ratio (1-4 : 8-5) (±5 %) N/A 2CT : 1 CT N/A 2.67CT : 1CT N/A 1.33CT : 1CT N/A 1CT : 1.33CT N/A 1CT : 1CT
Minimum ET(1-4) N/A 18 V-µSec N/A 18 V-µSec N/A 11 V-µSec N/A 11 V-µSec N/A 11 V-µSec
Maximum Direct Current Resistance (DCR) (1-4) N/A 1.50 Ohm N/A 1.50 Ohm N/A 1.00 Ohm N/A 1.00 Ohm N/A 1.00 Ohm
Maximum Inductance LL(1-4) N/A 1.50 µH N/A 2.00 µH N/A 1.20 µH N/A 1.20 µH N/A 1.00 µH
Maximum Capacitance Cww (1-4 to 8-5) N/A 45 pF
Hi-Pot (1-4 to 8-5) N/A 4500 Vrms
Industry Standards / Certifications N/A EN60950 IEC950 RoHS Compliant UL1950
Standard Operating Temperature Range N/A -40 to +85 ºC
Available Design N/A custom
Note N/A
  • Primary: Connect 1-2 and 3-4 in series
  • Secondary: Connect 8-7 and 6-5 in series
  • OCL, LL, Cww measured at 100 kHz, 0.1 Vrms
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10