COMPANY HEADER
Print Back
  • Isolated flyback transformers with high output voltage
  • Ideal for use in medical applications
  • Input: 12-30 Vdc, Output: 1 kV - 2 kV
P3800 Series Isolated Flyback Transformers
Dimensional Drawing for P3800 Series Isolated Flyback Transformers
Unit of Measure
Items P3800 Series Isolated Flyback Transformers
P3800-1
50 Watt (W) Power Output P3800 Series Isolated Flyback Transformer
P3800 Series Isolated Flyback Transformers
P3800-2
70 Watt (W) Power Output P3800 Series Isolated Flyback Transformer
P3800 Series Isolated Flyback Transformers
P3800-3
80 Watt (W) Power Output P3800 Series Isolated Flyback Transformer
P3800 Series Isolated Flyback Transformers
P3800-4
100 Watt (W) Power Output P3800 Series Isolated Flyback Transformer
P3800 Series Isolated Flyback Transformers
P3800-5
150 Watt (W) Power Output P3800 Series Isolated Flyback Transformer
Power Output N/A 50 W N/A 70 W N/A 80 W N/A 100 W N/A 150 W
Direct Current (DC) Input Voltage N/A 12 V N/A 18 V N/A 18 V N/A 24 V N/A 30 V
Switching Frequency N/A 50 kHz N/A 60 kHz N/A 80 kHz N/A 80 kHz N/A 100 kHz
Primary OCL (±10 %)(4-3) N/A 6 µH N/A 8 µH N/A 5 µH N/A 8 µH N/A 6 µH
Maximum Primary Direct Current Resistance (DCR) (4-3) N/A 8 mOhm N/A 10 mOhm N/A 8 mOhm N/A 10 mOhm N/A 10 mOhm
Turns Ratio (Primary : Secondary)(±3 %) N/A 1 : 100 N/A 1 : 70 N/A 1 : 80 N/A 1 : 60 N/A 1 : 60
Maximum Secondary Direct Current Resistance (DCR) (8-12) N/A 130 Ohm N/A 90 Ohm N/A 42 Ohm N/A 30 Ohm N/A 30 Ohm
Industry Standards / Certifications N/A RoHS Compliant
Standard Operating Temperature Range N/A -40 to +85 ºC
Direct Current (DC) Isolation Voltage (Primary and Core to Secondary) N/A 4000 V
Available Design N/A custom
Note N/A
  • Primary OCL (4-3) measured at 10 kHz, 0.1 Vrms
  • Hipot: 4000 Vdc, 0.5 mA, 5 s (Primary and Core to Secondary), 500 Vdc, 0.5 mA, 5 s (Primary to Core)
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10